Atosa USA MKC23 23 inch Keg Cooler

Atosa USA MKC23 23-Inch Commercial Keg Cooler

After a long journey of tiredness, there’s nothing more refreshing than a soothing, cold beer. There are special beer coolers that are also called as draft beer coolers or kegerators. This special refrigerator is used in the bars for keeping the beer cold in the keg. No matter how it sounds, beer coolers have made their way into the industry for their advantageous properties like flexible combination, economic & practical benefits. The cooler also emphasizes on putting components independently, allowing a better beverage management. It also reduces the maintenance cost.

Why you need draft beer coolers? In the case of beer coolers, the commercial area requires heavy-duty components with lower maintenance problems (easy to clean & replace, capable of holding varieties of beers on draft etc.). However, even within the home environment, the commercial beer refrigerators also work greatly. In fact, they are a better choice than traditional refrigerators as they come up with couplers, faucet towers, and even CO2! These facilities ensure the best quality of the beverages.

For the commercial establishment, draft beer coolers are must-have. The equipment of the cooler is designed perfectly so that it can maintain the optimal temperature (36-38°F) at the legs of all the beer bottles. Thus, all the served beers are perfectly chilled, fresh and properly carbonated for the maximum enjoyment. You can get a beer cooler anywhere – restaurant, food truck, bar, pub or even at your home. Commercials can ensure the best quality product served to their customers in seconds. In a general draft system, there are 6 main components – keg, cooler, gas, tubing, coupler, and faucet. The setup can be more complex, but these are the basics. All the 6 pieces work together in the perfect harmony for delivering the best beverage to everyone with a soothing, foamy head.

Atosa Keg Cooler

The features of Draft beer coolers. The draft beer coolers are mostly for the commercial area. The Atosa USA MKC draft beer refrigerator series have different properties of products 2-keg, 3-keg and 4–keg beer capacity with solid, lockable doors, 2 faucet towers, magnetic gaskets and stainless steel exterior and interior. There is also a system – forced-air refrigeration that ensures ice cold temperature for dispensing. The top is made from strong stainless steel with a drip tray to ease the maintenance. The models are quite elegant for usages like digital temperature controls, safety door locks and casters for easier relocation. There are choices between 2 doors and 3 doors as well.

Different models are useful in different conditions. For example, small bars, food trucks, and home brewers should choose a half-barrel draft beer coolers as its size power consumption is convenient in such situations. For heavier duties like restaurants or bustling bars, there are bigger styles that can hold a larger quantity – up to 5 half-barrels at a time! Of course, the bigger one is suitable for providing more choices of beers.

The job isn’t complete yet. The beer won’t taste good until you put enough effort into regular maintenance. Draft systems need to go under maintenance for ensuring the best taste. Ideally, it should be enough to clean the draft system every 2-3 weeks and replacing worn-out components regularly. The maintenance frequency may also change depending on the usage rate. A little effort is a key to success. Enjoy your beverage with the best beer coolers!

Atosa USA MKC23 One 1/2 barrel capacity Commercial Keg Cooler

• The Next Generation of commercial refrigerators offers a quality Under Counter – Beverage Refrigerators at an exceptional value, that help operators of commercial kitchens and restaurants realize better bottom line results.
• Featuring a combination of distinctive American styling and sturdy construction for day-to-day use. Priced right, the unit is loaded with features to accent your restaurants bar.
• Stainless steel exterior and interior design
• Dixell digital temperature control
• Heavy Duty Embraco Compressor
• Environmentally friendly R290 refrigerant
• Magnetic Door Gaskets
• Standard safety door locks
• Pre-installed epoxy coated shelves
• Pre-installed castors

Atosa USA MKC23 6.7 cu. ft. Commercial Keg Cooler

Atosa is dedicated to designing and professional grade stainless steel restaurant equipment. Tasteful and elegant for any kitchen. Ergonomic designed to complement your kitchen. The Traditional American inspired designed recessed door handles, rounded door edge, and the rounded interior corner are constructed for day-to-day use. The refrigeration systems matched and balanced oversized, high efficient compressor use of advanced technologies and components creates an environmentally friendly refrigeration system with shorter run times, lower energy consumption, and the coldest holding temperatures. The ozone-friendly and climate-friendly refrigerator uses CFC-Free refrigerants. Each unit is manufactured using a combination of high quality metals and international advanced technologies and components designed to optimize the units performance. Stainless steel exterior and interior with a galvanized steel back. Maximized and convenient storage capacity. A high density, CFC free polyurethane insulation for the entire cabinet structure and solid door. Providing unparalleled strength and rigidity. Each refrigerator come with three pre-installed heavy duty steel shelves that are manufactured to support 155 pounds per shelf. Food pans and wire shelves are interchangeable and adjustable. Each refrigerator has a 100% run test before releasing the unit to the customer. Prior to shipping, all Refrigeration units must pass an intense series of tests for a minimum run time of 24 hours. These tests include computer refrigerant charging and vacuum leak decay checks, helium leak detection, vibration noise level, visual examination and a temperature analysis.

UNIT SPECIFICATIONS

Atosa Draft Beer Cooler, 23″W x 31-1/8″D x 54-3/4″H, rear-mounted self-contained refrigeration, (1) 1/2 barrel capacity (6.7 cu. ft.), (1) dual faucet tower, (1) locking solid door, stainless steel interior & exterior, 4″ casters, R290 Hydrocarbon refrigerant, 1/7 HP, 115v/60/1-ph, 2.3 amps, NEMA 5-15P, includes: manifold & ball taps, cETLus, ETL-Sanitation, ENERGY STAR.

Dimensions

Dimensions 54.75(h) x 23(w) x 31.13(d) inches.

Spec Sheet

Spec Sheet Atosa USA MKC23 23-Inch Commercial Keg Cooler